Re: [partition] option in [request system software add] command
Hi Supuluka-san, I found the answer for my question as below.That is the same as old branch series. Hence, I think that the behavior as my testing is the bug. =======Partition install is supported on...
View ArticleJuniper SRX3600
Hi, I wolud like to reproduce Juniper SSG-520M config on Juniper SRX3600.I really need your help to do this.I can send you the SSG-520M config file.RegardsMahaman Sani
View ArticleRe: Juniper SRX3600
Hi, Maybe you could give this a try:ScreenOS to Junos configuration Translation Tool (S2J) Cheers,Ashvin
View ArticleRe: Juniper SRX3600
As Ashvin mentions, there is a basic converstion tool on the support site. This is a good place to start as it will pick up a lot of the common configuration translations. The tool will then identify...
View ArticleSNMP Configuration issue on SRX
Hi All, While configuring SNMP community string "XYZ"(with IP 192.168.1.30/32)everything goes ok but when i enter commit it returns me following error. 'interfaces ge-0/0/4.0' Interface ge-0/0/4.0...
View ArticleRe: SNMP Configuration issue on SRX
Can you please share the output of ">show config | display set | match ge-0/0/4" ?If we go by the error, it indicates that ge-0/0/4.0 has been configured under two zones. Regards,Srinath
View ArticleRe: SNMP Configuration issue on SRX
Hi, I have found a solution. Actually I removed 192.168.1.0/24 from public string and then i tried 192.168.1.30/32 in string "xyz" and it worked. So my conclusion I can't use same interface in two...
View ArticleRe: Juniper SRX3600
Hi, Thank you for your reply. I'll try and make you a feedback. RegardsMahaman Sani
View ArticleRe: Juniper SRX3600
Hi Steve, I tried but I get some errors.Find attached output file. Please, I really need your help. RegardsMahaman Sani
View Article3G/4G USB modems and SRX future?
Hello.we are using hundred of SRX boxes for many years, and waiting for any normal solution for WAN backup link.not EOL CX box, with very limited modems support list.time is going and still no...
View ArticleClik here to view.
Re: Dynamic VPN Security Policies
Hello, Please check the below KB article if it answers all your queries regarding the Dynamic VPN. http://kb.juniper.net/InfoCenter/index?page=content&id=KB23954&actp=search Please update if...
View ArticleRe: Juniper SRX3600
Hi, You may need to adapt the interfaces as the logical interfaces on the Screenos have not been converted.You will have to convert NSRP cluster to an SRX cluster config.Some of the errors reported may...
View ArticleVoIP configuration for SRX240 cluster
Hello, I have a client with an SRX cluster, connected to 100x100 internet. They have about 20 phones that connect to Vonage Business, about the same number of PC's, some VPN's, etc.. We are having...
View ArticleRe: VoIP configuration for SRX240 cluster
Hello,You might want to increase UDP session idle-timeout from default 60 sec to 2-3 mins or more. http://kb.juniper.net/InfoCenter/index?page=content&id=KB21344 Unless You know the UDP RTP port...
View ArticleRe: 3G/4G USB modems and SRX future?
I'm just an end-user customer, so you should probably check with your Juniper partner for a full view of the potential roadmap for this type of feature. But I think based on the time past and the lack...
View ArticleClik here to view.
Re: 3G/4G USB modems and SRX future?
Hello spuluka.I'm end-user customer too, but there is no difference who we are - we are customers.no new age - no customers- no money. no money - no honey that is simple enought for everyone.and...
View ArticleRe: Juniper SRX3600
Some notes on the annotations for your conversion. The messages before line 89 can all be ignored. These I am not sure what the tunnel option is for zones to a virtual router. This will need to be...
View ArticleNAT inbound not connecting through SRX for some services and allowing other
I have an SRX220H2 that is allowing some connections inbound such as 3389 but not 9081,908210001,10002. I have confirmed I can access the devices on the ports detailed and can ping from the SRX to...
View ArticleRe: SRX300 usb serial console driver - which one?
Hi Jonas, I've hit the same problem that you did, but to solve it I signed the driver that Juniper provided for the SRX550. This allows you to install the driver without needing to change your driver...
View ArticleRe: Two Pairs of SRX Clusters on MAC Address Conflicts !
Wowza, lost 8 hours on this one. Indeed, I solved the problem the hard way, finding the dupe MAC and first wonderng if this was a BIA. Having some good search terms in hand brough me here. ....
View Article